The MAX504/MAX515 are low-power, voltage-output, 10-bit digital-to-analog converters (DACs) specified for single +5V power-supply operation. The MAX504 can also be operated with °?5V supplies. The MAX51 draws only 140PAA, and the MAX504 (with internal refer ence) draws only 260PAA. The MAX515 comes in 8-pi DIP and SO packages, while the MAX504 comes in 14 pin DIP and SO packages. Both parts have been trimmed for offset voltage, gain, and linearity, so no further adjustment is necessary.
The MAX515°Os buffer is fixed at a gain of 2. The MAX504°internal op amp may be configured for a gain of 1 or 2, as well as for unipolar or bipolar output voltages. The MAX504 can also be used as a four-quadrant multiplier without external resistors or op amps.
For parallel data inputs, see the MAX503 data sheet. For a hardware and software compatible 12-bit upgrade, refer to the MAX531/MAX538/MAX539 datasheet.
|
|
|
Battery-Powered Test InstrumentsDigital Offset and Gain AdjustmentBattery-Operated/Remote Industrial ControlsMachine and Motion Control DevicesCellular Telephones
|
Operate from Single +5V SupplyBuffered Voltage OutputInternal 2.048V Reference (MAX504)140μA Supply Current (MAX515)INL = 1/2LSB (max)Guaranteed Monotonic Over TemperatureFlexible Output Ranges: 0V to VDD(MAX504/MAX515) VSSto VDD(MAX504)8-Pin SO/DIP (MAX515)Power-On ResetSerial Data Output for Daisy-Chaining
|
VDDto DGND and VDD to AGND................................-0.3V, +6V
VSS to DGND and VSSto AGND .................................-6V, +0.3V
VDDto VSS .................................................................-0.3V, +12V
AGND to DGND........................................................-0.3V, +0.3V
Digital Input Voltage to DGND ......................-0.3V, (VDD + 0.3V)
REFIN..................................................(VSS-0.3V) (VDD+ 0.3V)
REFOUT to AGND.........................................-0.3V, (VDD+ 0.3V)
RFB .....................................................-0.3V, (VDD + 0.3V)
BIPOFF................................................(VSS-0.3V) (VDD+ 0.3V)
VONT(Note 1)................................................................Vss, VDD
Continuous Current, Any Pin................................-20mA, +20mA
Continuous Power Dissipation (TA= +70°C)
8-Pin Plastic DIP (derate 9.09mW/°C above +70°C).....727mW
8-Pin SO (derate 5.88mW/°C above +70°C)..................471mW
14-Pin Plastic DIP (derate 10.00mW/°C above +70°C).....800mW
14-Pin SO (derate 8.33mW/°C above +70°C)................667mW
Operating Temperature Ranges
MAX5_ _C_ _.........................................................0°C to +70°C
MAX5_ _E_ _......................................................-40°C to +85°C
Storage Temperature Range.............................-65°C to +165°C
Lead Temperature (soldering, 10sec).............................+300°C
Post a Buying Lead
Required Field 
